ViewSonic VPC220 Guide de l'utilisateur télécharger pdf (Page 46)

ViewSonic VPC220 39

SupervisorPassword

The Supervisor can access and change setup utilities. He/she can also define the

limitation of user access.

To set or change the supervisor password:

1. Select ChangeSupervisorPassword.

2. Type the password, then press [Enter]. A password can have up to six

alphanumeric characters and/or numbers.

3. Re-type the password to confirm, then press [Enter].

Once the Supervisor password is set, you can change the User Access Level. The

access level options are:

• FullAccess: Users can access and change all BIOS settings.

• Limited: Users are only allowed to change basic settings such as date and

time.

• NoAccess: Users cannot access the BIOS Setup Utility.

• ViewOnly: Users can view the BIOS Setup Utility but cannot change the

settings.

UserPassword

Set the User Password under this setting. Note that Supervisor Password allows the

user to enter and change the settings of the setup menu; User Password only allows

the user to enter the setup menu, but do not have the right to make any changes.

To set or change the user password:

1. Select ChangeUserPassword.

2. Type the password, then press [Enter]. A password can have up to six

alphanumeric characters and/or numbers.

3. Re-type the password to confirm, then press [Enter].

The Access level defined by the Supervisor determines the users’ setup utility access.

PasswordCheck

When a Supervisor or User password has been set, the Password Check option

will be available in the Security Menu. With this option, you can configure when the

system will prompt you for the password:

• Setup: You are required to enter the password every time you access the BIOS

Setup Utility.

• Always: You are required to enter the password on every system boot.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 58 59

Pas de commentaire

ViewSonic VPC220 Guide de l'utilisateur Page 46