ViewSonic PJD6223 Guide de l'utilisateur télécharger pdf (Page 61)

Lamp information

Getting to know the lamp hour

When the projector is in operation, the duration (in hours) of lamp usage is automatically

calculated by the built-in timer.

To obtain the lamp hour information:

1. Press MENU/EXIT on the projector or Menu on the remote control and then press

/ until the SYSTEM SETUP: Advanced menu is highlighted.

2. Press to highlight Lamp Settings and press MODE/ENTER on the projector or

ENTER on the remote control. The Lamp Settings page is displayed.

3. You will see the Equivalent lamp hour information on the menu.

4. To leave the menu, press MENU/EXIT on the projector or Exit on the remote

control.

You can also get the lamp hour information on the INFORMATION menu.

Extending lamp life

The projection lamp is a consumable item. To keep the lamp life as long as possible, you

can do the following settings via the OSD menu.

Setting Lamp Mode as Economic

Using Economic mode reduces system noise and power consumption by 20%. If the

Economic mode is selected, the light output will be reduced and result in darker projected

pictures.

Setting the projector in Economic mode also extends the lamp operation life. To set

Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings > Lamp

Mode menu and press / .

Setting Auto Power Off

This function allows the projector to turn off automatically if no input source is detected

after a set period of time to prevent unnecessary waste of lamp life.

To set Auto Power Off, go into the SYSTEM SETUP: Basic > Auto Power Off menu and

press / . If the preset time lengths are not suitable for your presentation, select Disable.

The projector will not automatically shut down in a certain time period.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 87 88

Pas de commentaire

ViewSonic PJD6223 Guide de l'utilisateur Page 61