ViewSonic PJD7820HD Guide de l'utilisateur télécharger pdf (Page 58)

12. Restart the projector.

CAUTION

Do not turn the power on with the lamp cover removed.

Resetting the lamp timer

13. After the startup logo, open the On-Screen

Display (OSD) menu.

14. Go to the SYSTEM SETTING:

ADVANCED > Lamp Settings menu. Press

MODE/ENTER on the projector or ENTER

on the remote control. The Lamp Settings

page is displayed.

15. Press to highlight Reset lamp timer and

press MODE/ENTER on the projector or

ENTER on the remote control. A warning

message is displayed asking if you want to

reset the lamp timer.

16. Highlight Reset and press MODE/ENTER

on the projector or ENTER on the remote

control. The lamp time will be reset to '0'.

CAUTION

Do not reset if the lamp is not new or replaced as this

could cause damage.

9. Place the lamp protection film supplied

with the new lamp on the lamp

compartment.

10. Replace the lamp cover on the projector.

11. Tighten the screws that secure the lamp

cover.

CAUTION

• Loose screw may cause a bad connection,

which could result in malfunction.

• Do not over tighten the screws.

Reset Lamp Timer

Reset

Cancel

Notice

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 83 84

Pas de commentaire

ViewSonic PJD7820HD Guide de l'utilisateur Page 58